Examples of engineering services
|
|
Geotechnical Finite element Elastoplastic Analysis Software (GeoFEAS)2D |
|
Embankment
|
Number of nodes=1260 / Number of stages=6
Beam elements are used. / 2D ordinary model
|
|
Analysis of earth retaining works in adjacent construction |
Number of nodes=1260 / Number of stages=6
Live load exists. / Beam elements are used. / 2D ordinary model
|
|
|
Liquefaction analysis |
Number of nodes=5809 / Number of stages=1
Beam elements are not used. / 2D Liquefaction analysis model
|
|
|
|
Geotechnical Finite element Elastoplastic Analysis Software (GeoFEAS)3D |
|
Pile foundation analysis |
Number of nodes=2180 / Number of stages=2
Beam elements are not used. / 3D ordinary model
|
|
Bridge and Tunnel analysis |
Number of nodes=10347 / Number of stages=2
Beam elements are not used. / 3D ordinary model
|
|
|
Dynamic effective stress analysis for ground (UWLC) |
|
Embankment |
Number of nodes=2440 / Number of stages=1 Ground surface inclines / No surcharge load / Only solid model / 2D ordinary model / Effective stress analysi
|
|
Box culvert |
Number of nodes=1103 / Number of stages=1
No ground surface inclination / No surcharge load / Solid model, beam model / 2D ordinary model
|
|
|
3-D slope stability analysis (LEM) |
|
|
Number of nodes=3500 / Number of stages=1 Water table exists
|
|
|
Number of nodes=296 / Number of stages=1 Arbitrary water pressure is considered. / Ordinary model
|
|
|
3D seepage analysis (VGFlow) |
|
Analysis of influence on levee by rainfall |
Number of nodes=738 / Number of stages=1 Surcharge load is considered (rainfall boundary, water variation boundary) / Solid model only / 2D ordinary model / Unsteady analysis
|
|
3D excavation |
Number of nodes=18,766 / Number of stages=1
No ground surface inclination / No surcharge load / 3D ordinary model /
Solid model only / Steady analysis
|
|