Ver. Date Update contents
2.00.00 '16.12.16 Major Updates
  1. Identification analysis program by the optimization method is attached.
  2. Supporting topographic data for ground analysis (*.GF1).
  3. Importing DXF and DWG file.
  4. "CAD file import" by pre part supports AutoCAD2007 file format.
  5. Semi automatic setting of entered parameter (PZ-sand)
  6. Vibrations in the vertical direction and horizontal direction can be supported at the same time.
  7. When creating a model, it is now possible to determine whether the distance between points is close or not.
  8. Added a function to cancel all blocks in [Create_model] - [Decide] tab
  9. Added a command to set the selected node as origin in [Create_model] - [Create] tab.
  10. Added "Open sample data file" in the File menu.


Fixed Problems
  1. Fixed an error when importing a 1D analysis model and checking the mesh.
  2. It is now not possible to set "Large deformation" of strain area of initial stress analysis and "Medium to large deformation" of dynamic analysis deformation state since the analysis part is currently unsupported.
  3. Fixed the case where an exception occurred during program execution due to insufficient resources, and the process could not be continued.
  4. Fixed the issue where the element test simulation did not work with web authentication.
  5. Fixed a bug in the initial stress analysis that caused incorrect calculations when forced displacement in the Y direction was entered.
  6. When the calculation model was large, the number of all Gaussian points was larger than expected, and the result data could not be read correctly, and a part of the post section - tree menu was not displayed. Fixed.
  7. Fixed a bug that caused an error during analysis when applying a stacking model to the constitutive law.
  8. Fixed the issue of "unexpected error" (insufficient stack space) during analysis depending on the scale of the model.


Modification in Help
  • Introduction-About this product-Compatible file for soil analysis
  • Introduction-About this product-Topographic data file for soil analysis
  • Introduction-About this product-How to make a file of initial stresses from the output of GeoFEAS2D
  • Operation method-Preprocessor operation-Speed button-Tool tool bar
  • Operation method-Preprocessor operation-One-dimensional analysis-[PZ-Sand parameter estimation] dialog
  • Operation method-Preprocessor operation-Two-dimensional analysis-[Create_model] - [Create] tab
  • Operation method-Preprocessor operation-Two-dimensional analysis-[Create_model] - [Decide] tab
  • Operation method-Preprocessor operation-Two-dimensional analysis-[Create_model] - [Decide] tab
  • Operation method-Preprocessor operation-Two-dimensional analysis-Windows/Dialogs-[Set up SXF file import condition] dialog
  • Operation method-Preprocessor operation-Two-dimensional analysis-Windows/Dialogs-[Import water table data] dialog
  • Operation method-Preprocessor operation-Two-dimensional analysis-[Modify coordinate] dialog
  • Operation method-Postprocessor operation-Speed button-Draw option toolbar (postprocessor)
  • Operation method-Postprocessor operation-Child windows-Data output-Node_data_output
  • Operation method-Postprocessor operation-Child windows-Data output-Plane_strain_element_data_output
  • Operation method-Postprocessor operation-Child windows-Data output-Beam_element_data_output
  • Operation method-Postprocessor operation-Child windows-Data output-Spring_element_data_output
  • Sample data

* We have made many other changes and additions.
Page Top Page Top
Back
Version Update History

FORUM8