1) Possible to apply VR space freely and give various driving environments in real-time

1. A 3D VR space can be freely created at the user's will. Elements such as 3D cockipit, manual transmission, or mult-screen are also available. Supports event / sceneraio assignment and setting.
2. Freely alter the driving environment by toggling numerous visual options from Visual Options.

2) Possible to implement various safety devices and give customization of the simulator

1. ABS (Antilock Braking System)
2. 4WD
3. Stability control
4. Collision avoidance
5. Lane-keep assistance
6. Power steering contol
7. Adaptive cruise control

Most of the above features are developed by expanding the fundemental software library. Customizations are provided through made-to-order services.

3) Free standard VR data corresponding customization of scenario, events, and higher Hz

Sample road, traffic, or city models that are bundled in the UC-win/Road Web Viewer can be freely used.
Supports interactive driving scenario makings such as placing road obstructions (detour), or controlling traffic signal controls to create or recreate a circumstance.
Other elements such as collision-box or traffic accidents can also be optionally quoted and produced. 　

4) Compact body design

1. Streamlined egg-shaped design - round body due to safety consierations
2. Low floor
3. Floor can be depressed to low enough to achieve better rideability.
4. Space Optimization: single seater setting and the optimization of the instrument panel locations provide a comfortable driving environment
5. Dedicated one-screen display to achieve space optimization
6. Steering mechanism made possible by these optimization

5) Realistic maneuver

1. Realistic driving ssensations through the incorporation of force feedback technologies
2. Realistic pedals providing the same sensations as if driving in the real world

6) Easy setup and mobility

1. Require minmal space to set up
2. Highly portable - simply load onto a castor and lower the jacks at a desired location to set up after moving. As for the power, only one 100V monophase current is required.

7) Standard equipment of each safety device

1. 3-point seat belt; engine inhibitor when seat belt is not fastened.
2. Emergency button to quickly stop or conveniently hold the current machine

Various pre-determined movements or event triggers can be assigned to models in UC-win/Road to create scenarios. For example, traffic lights can be made as always turning red at a certain point, always make a congestion at a certain spot at a certain time, etc. This gives endless freedom and combinations to create or recreate the events that are necessary for a realistic driving simulator.

Driving conditions (elevation, friction, crosswind, etc.) dynamics, and parameters (pedal control inputs, steering, etc) from the Experience Simulator can be analyzed and have its motion refined accordingly for increased realism. This data can be reflected back into UC-win/Road's VR environment.

▲Virtual Mechanics's CarSim

▲Basic Motion Control Program

Road condition replication & customization

Highly Precise Simulation Based on Road Materials, Conditions and Types

Users are free to define the road friction coefficient μ to match the potential (weather) condition of wish. These will be accurately reflected back in the simulator and motion platform.

▲Driving through rain

▲Driving through snow

▲Stormy

▲F1 track driving

About display performance: Please maintain frame rate to avoid motion sickness

Dimension	W2810 × D2320 × H1985
Weight	650kg
Power Supply	200V 20A × 2 system 100V 15A × 1 system
Maximum Speed	225mm/sec
Payload	350kg
Motion Platform	Electric 6-axis motion cylinders
Monitor	40 inch monitors ×3 9 inch monitors for dashboard guages ×2 12 inch monitor at rear canopy for driver facial recognition 7 inch monitor for car navigation systems
Steering System	2 different types of selectable electric steering wheels Tilt mechanism in steering Combination switches Horn
Switches	Start switch Hazard switch Parking switch Emergency switch Reset switch Display setting switch ×6
Sound / Vibration	7.1ch surround sound system Harmonics vibration system
Interior	Recaro sport seat, MOMO steering wheel, floor mat, storable seat belt Oriinal dash board. Steering wheel can be altered between left hand traffic or right hand traffic. Installation space for up to 7 speakers Can be equipped with super subwoofer
Exterior (Original Design)	LED-illuminated side panels, headlights, brake lights, turn signals
Ramp	Choose between a large stepping ramp or a more stylish one
Base (Original Design)	Easy loading onto a castor upon lower the jacks LEDs also serve as a caution light reminding other's that the simulator has been activated.

FORUM8 Driving Simulator Complies to ROHS Guidelines

Note that most regions other than the EU do not adopt the ROHS and thus can be sold without problems.
The ROHS prohibits the use of following materials that are harmful to humans：　lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr6+), polybrominated biphenyls (PBB), polybrominated diphenyl ether (PBDE).

Desktop PC sold separately. Software price (UC-win/Road (USD8,800)

DS Option (USD3,360), MP Option (USD8,600)

Product Type	Price	Description
Compact Research Simulator (2010)	USD66,000 (3ch Default)	Simulator for Researches (UC-win/Road Driving Sim included) All parts and guages are true automobile parts. Supports both left / right hand traffic. Automatic transmission by default (manual transmission option available） ActiveSteering default, MP (1-6 axis) option
Driving Simulator (2013)	USD316,400 (3ch default)	3ch. 32” LCD monitor (UC-win/Road DS op. included) 6DOF Motion Platform (max. payload 350kg) 5.1ch Speaker, Body Sound Force feedback-capable steering wheel (SENSO-Wheel) Gas / brake pedal system Direction indicator, mission option
Demo Simulator (2007)	USD10,000 (1ch default)	Small demonstration simulator (UC-win/Road excluded） Compact type for guidance, exhibtion. Start/Stop buttons. Equipped with steering wheel, gas / brake pedals

Hardware warranty is based on those specified by the manufacturer.

1. Railroad crossing accident

A situation of a vehicle ignoring the railway crossing warning signals, resulting in a collision. Both the track and the road are 200m.
Cars and trains are animated to recreate the collision, with the car flipping over and causing a derailment.

Data creation cost: USD3,200

---

2. Straying off a lane

A situation where a vehicle suddenly strays off a straight 800m road with excellent visibility. The vehicle wanders into the opposing traffic and collides with another car, spinning violently before coming to a stop.

Data creation cost: USD3,000

---

3. U-turn accident

A situation where accidents happened between traffic and a U-turning vehicle at a 800 m straight road.
Contains 2 different route patterns for each of the U-turning vehicle and the colliding vehicle. The violent movement after collision is also modeled after. The collidings cars also have damage details such as parts off and deformation.

Data creation cost: USD4,000